Technical data | ELX3351-0090 |
---|
Technology | resistor bridge, strain gauge |
Sensor types | resistor bridge, strain gauge |
Number of inputs | 1, for 1 resistor bridge in full bridge technology |
Bridge input resistance | 300 Ω…1.5 kΩ |
Measuring range UD | max. -20…+20 mV |
Measuring range UREF | max. -12…+12 V |
Internal resistance | > 25 kΩ (UR, differential), > 1 MΩ (UD, differential) |
Input filter limit frequency | typ. 3.6 kHz (-3 dB, low pass) |
Conversion time | typ. 1.6 ms |
Resolution | 24 bit, 32 bit presentation |
Filter | 50 Hz, configurable |
Measuring error | < ±0.5="" %="" (relative="" to="" full="" scale="" value),="" self-calibration=""> |
Power supply UV | up to 12 V DC from power contacts, dependent on sensor |
Supply voltage electronics | 24 V DC (via power contacts), ELX9560 power supply |
Current consumption power contacts | depends on sensor, min. 20 mA |
Current consumption E-bus | typ. 85 mA |
Supported nominal sensitivity | all, parameter resolution: 0.01 µV/V; recommended: 0.5…3 mV/V |
Special features | self-calibration, dynamic filters, Freeze, TwinSAFE SC |
Weight | approx. 60 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/see documentation |
Approvals/Markings | CE, ATEX, IECEx |
Ex-Marking | II 3(Или отправьте нам запрос наII (1)D [Ex ia Da] IIICI (M1) [Ex ia Ma] IEx ec [ia Ga] IIC T4 Gc[Ex ia Da] IIIC[Ex ia Ma] I |