Fiber optic sensor VL18LL-M/40a/118/128 - фото 1 - id-p95193900

Характеристики и описание

Описание оборудования
Fiber optic sensor for glass fiber optics
General specifications
Sensor range	up to 70 mm (LMR 18-3,2-1,0-K4)
Detection range	up to 300 mm (LME 18-2,3-0,5-K3)
Light source	LED, 650 nm visible red light
Light type	modulated visible red light
Angle of divergence	26 °
Optical face	frontal
Ambient light limit	30000 Lux
Hysteresis	< 15 %
Functional safety related parameters
MTTF_d	700 a
Mission Time (T_M)	20 a
Diagnostic Coverage (DC)	0 %
Indicators/operating means
Operation indicator	LED green, flashes in case of short-circuit
Function indicator	LED yellow, lights up with receiver lit
Control elements	Sensitivity adjuster, light/dark switch
Electrical specifications
Operating voltage	10 ... 30 V DC , class 2
Ripple	10 %
No-load supply current	< 35 mA
Protection class	II , rated voltage ? 50VAC with pollution degree 1-2 according to IEC 60664-1
Output
Switching type	light/dark on, switchable
Signal output	Push-pull (4 in 1) output short-circuit protected overvoltage protected
Switching voltage	30 V DC
Switching current	max. 200 mA
Voltage drop	? 2.5 V DC
Switching frequency	500 Hz
Response time	1 ms
Compliance with standards and directives
Directive conformity	EMC Directive 2004/108/EC
Standard conformity
Standard conformity
Standards	EN 60947-5-2
Approvals and certificates
UL approval	cULus Listed, Type 1 enclosure
CCC approval	CCC approval / marking not required for products rated ?36 V
Ambient conditions
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-30 ... 70 °C (-22 ... 158 °F)
Mechanical specifications
Degree of protection	IP67
Connection	M12 connector, 4-pin
Material
Mass	60 g