General specifications | |
---|---|
Detection type | magnetic sampling |
Device type | Absolute encoders |
Linearity error | ? ± 0.1 ° |
UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. |
Functional safety related parameters | |
MTTFd | 700 a at 40 °C |
Mission Time (TM) | 20 a |
L10 | 10 E+8 revolutions |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications | |
Operating voltage | 4.75 ... 30 V DC |
Power consumption | ? 1 W |
Time delay before availability | < 450 ms |
Output code | Gray code, binary code |
Code course (counting direction) | adjustable |
Interface | |
Interface type | SSI |
Resolution | |
Transfer rate | 0.1 ... 2 MBit/s |
Cycle time | < 100 µs |
Standard conformity | RS 422 |
Input 1 | |
Input type | Selection of counting direction (cw/ccw) |
Signal voltage | |
Input current | < 6 mA |
Switch-on delay | < 250 ms |
Input 2 | |
Input type | zero-set (PRESET 1) with falling edge |
Signal voltage | |
Input current | < 6 mA |
Signal duration | min. 1.1 s |
Connection | |
Connector | M12 connector, 8-pin |
Cable | ?7 mm, 6 x 2 x 0.14 mm2, 1 m (cable length, see order code) |
Standard conformity | |
Degree of protection | DINEN60529 , IP66 / IP68 / IP69K |
Climatic testing | DINEN60068-2-3, no moisture condensation |
Emitted interference | EN61000-6-4:2007 |
Noise immunity | EN61000-6-2:2005 |
Shock resistance | DINEN60068-2-27, 300g, 6ms |
Vibration resistance | DINEN60068-2-6, 30g, 10...1000Hz |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
Ambient conditions | |
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | 98 % , no moisture condensation |
Mechanical specifications | |
Material | |
Mass | approx. 350 g |
Rotational speed | max. 6000 min -1 |
Moment of inertia | 30 gcm2 |
Starting torque | < 5 Ncm |
Shaft load |
<img alt="" src=" https://images.by.prom.st/268041643_w640_h2048_mts_logo_1.png?fresh=1&PIMAGE_ID=</h3> |